WEN PL1337 15-Amp 13-Inch Two-Speed Spiral Benchtop Thickness Planer

The WEN PL1337 is a 13-inch two-speed benchtop thickness planer that brings rough and worn boards down to a smooth, even finish. Its spiral cutterhead uses 26 staggered and rotatable high-speed steel blades to shear the wood cleanly across hard and soft species. A 15-amp motor turns the cutterhead at up to 10,000 rotations per minute.

Two-speed operation lets you match the feed rate to the job. The 26 feet-per-minute setting moves stock quickly for rough dimensioning at 833 cuts per inch, while the 16 feet-per-minute setting slows the feed to 1354 cuts per inch for a finer surface. The planer handles boards up to 13 inches wide and 6 inches thick, removing 0 to 1/8 inch per pass.

An onboard material removal gauge shows how much stock each pass takes off, and a depth stop lets you return to an exact thickness. Height-adjustable infeed and outfeed tables support the workpiece and help limit snipe. A combination 2-1/2-inch and 4-inch dust port, onboard wrench storage and predrilled base holes round out the design.

What's Included:

• WEN PL1337 13-inch two-speed benchtop thickness planer
• Spiral cutterhead with 26 HSS blades
• Height-adjustable infeed and outfeed tables
• Combination 2-1/2-inch and 4-inch dust port
• Workpiece return rollers
• Depth stop and material removal gauge
• Onboard wrench storage
• Two-year manufacturer coverage

Specifications

• Model: PL1337
• Cutterhead: Spiral with 26 HSS blades
• Maximum planing width: 13 inches
• Maximum planing thickness: 6 inches
• Motor: 15 amps
• Cutterhead speed: Up to 10,000 RPM
• Feed rates: 16 and 26 feet per minute
• Cuts per inch: 1354 at 16 FPM, 833 at 26 FPM
• Maximum depth of cut: 1/8 inch per pass
• Dust port: Combination 2-1/2 inch and 4 inch
• Coverage: Two-year manufacturer